Hi, welcome to Shenzhen Xianfeng Microwave

Tel:+86 18719065966   ( WhatsApp / Line / WeChat )



 APPLICATION AREAS
Custom SAW resonator_R315 3070 resonator
    Publish time 2016-08-24 09:49    

The surface acoustic wave resonator is referred to as SAW resonator. The center frequency of R315 resonator is 315MHz. The frequency tolerance is ±75KHz; The package form is SMD, the size is 3*7mm, with small insertion loss (≤1.0dB), small size, temperature (temperature: -20℃--+70℃; Storage temperature: -45℃--+85℃) Good characteristics, high integration, easy welding, good weldability, light weight, good performance, high stability, cheap price and other advantages.

Custom SAW resonator_R315 3070 resonator


一、Characteristics

   

     315MHz surface acoustic filter resonator (also known as SAW resonator or The main features of R315 resonator) are large design flexibility, compatible with analog and digital circuits, small group delay time, small deviation, good frequency selectivity, small input and output impedance error, small transmission loss, good anti-electromagnetic interference (EMI) performance, high reliability, small size, light weight, and can achieve a variety of complex functions. The R315 has a center frequency of 315MHz, a frequency tolerance of ±75KHz, and a package form of SMD 3mm*7mm. R315 3070 Sound meter resonator has small insertion loss (≤1.2dB), temperature (temperature: -20℃--+70℃; Storage temperature: -45℃--+85℃) good performance, excitation power is 10 μW ~ 100 μW, electrostatic capacitance is 7.0pF Max, aging rate is ±5ppm/year(the first year), High integration, easy welding, good weldability, light weight, good performance, high stability, cheap and easier to install than the traditional ceramic resonator, smaller volume and so on. The biggest drawback of the R315 sound meter resonator is that the bandwidth is too narrow (tens of KHZ), resulting in extremely slow download speeds.


R315 resonator

R315 resonator  


1、Maximum   Ratings


Rating)

Value

Units

CW RF Power Dissipation

+ 10 

dBm

DC Voltage Between Any Two Pin

± 30

VDC

Operating Temperature Range

- 20 ~ +70 



  2、Electronic Characteristics


Characteristic SymMinTypMaxUnits

Center Frequency

(+25℃)

Absolute FrequencyfC314.925315315.075MHz
Tolerance from 315MHz
△fC
± 75

kHz
Insertion LossIL
1.41.8dB

(Quality Factor

Unloaded QQU
12000

50Ω  Loaded  QQL
1000

Temperature Stability

Turnover TemperatureTO52035
Turnover FrequencyfO
fc
kHz
Frequency Temperature Coefficient
FTC
0.046
ppm/℃2
Frequency Aging Absolute Value during the First Year|fA|
≤10
ppm/yr
DC Insulation Resistance Between Any Two Pins
1.0

MΩ 

RF Equivalent RLC Model

Motional ResistanceRM
12.220
 motional inductanceLM
77.6
µH
Motional CapacitanceCM
3.29
fF
Pin 1 to Pin 2 Static CapacitanceCO
2.5
pF


                                            

二、Package Dimension

    

R315谐振器尺寸图



PinConfiguration
1Input
2Case Ground
3Output



三、Marking


Marking
R SAW resonator
315Center Frequency



四、Typical Frequency Response

   

Typical Frequency Response

 

Typical Frequency Response

五 、Application & attention

         

      The center frequency (315MHz) of the R315 surface acoustic wave resonator was measured at a temperature of + 25±2 ° C in a 50Ω test system with an insertion loss of 1.4dB.

 

     ◆ Frequency aging refers to the change in the center frequency (315MHz) over time and is measured at +65 ° C (or above) for a long time. Typically, the degree of aging is highest in the first year after production and gradually decreases in subsequent years.

     

    ◆ Target temperature refers to the temperature measured from the lowest frequency of 314.925MHz to 315MHz and then to the highest frequency of 315.075MHz.

     

    ◆  The nominal frequency at any temperature can be calculated by :f = f0 [1-FTC (T0-TC)*2].


      Because the resonator of 315MHz 3070 package is widely used in the test remote control, wireless transmitter module, wireless wisdom socket, smart door lock, wireless doorbell, wireless alarm, wireless communication system and remote transmitter. When used, the welding temperature should not be too high, and the time should not be too long. If reflow welding is used, reference temperature is recommended, and wave crest welding is not recommended. Products should be stored in the ambient temperature of -10℃~40℃, relative humidity is not more than 80%, the surrounding environment is not acidic, alkaline and other harmful gases in the warehouse. Do not soak when cleaning, it is recommended to wipe with alcohol.


     The company has R433 sound meter resonator, R315 sound meter resonator and other frequencies of various package sizes of the sound surface resonator. For the frequency and package of routine use, timely delivery can be achieved.

+86-0755-23204948

+86-0755-23204948

+86-0755-23204948

sales@xfwav.com
5th Floor,Building D,Yisai Science Park,115 Reservoir Rood,Baoan District,Shenzhen

+86-0-18719065966

+86-0755-23204948

Contact us
Name:
Tel:
Instructions:
E-mail Address
Submit
Online Massage
sales@xfwave.com
5th Floor, Building D, Yisai Science Park, 115 Reservoir Road, Baoan District, Shenzhen
    Professional custom ceramic wave device, ceramic resonator, sound meter filter, ltcc antenna, ltcc bridge, ltcc coupler, ltcc Balen, ltcc filter, comber, multiplexer, waveguide filter and other microwave electronic components manufacturers

+86-0755-23204948